Frequency of replacement of oil in the engine of Toyota Corolla
The manufacturer recommends changing engine oil at around 10,000 km. run The extreme “threshold” of replacement is 15,000 km. It is very important to observe the interval, because it depends on:
- quality of cooling of engine components;
- thermal conductivity;
- reduction of wear of components, components;
- stability of the power unit;
- reduced fuel consumption;
- reducing the amount of toxic emissions, the formation of soot in the combustion chamber, cylinder.
Used motor oil damages friction parts, components, contributes to their premature wear.
Factors affecting the frequency of oil change:
- general technical condition of the Toyota Corolla;
- frequency of operation;
- geographical conditions;
- climatic temperatures;
- downtime, traffic congestion;
- fuel quality, engine oil.
The choice of oil and the required volume
Manufacturer Toyota Corolla 150 recommends pouring the original engine oil “Toyota” with a viscosity index of 0W-20, 5W-30. The volume of oil in different engines is 4.00 – 4.25 liters. Exact data is necessary to look in the instruction manual. For models of 2011, 2013, 2014 release volume – 4.05 liters.
Many car owners are interested in the question: what kind of fluid to fill in to extend the life of the technical means. If the owner does not have sufficient funds for the purchase of factory oil, choose an alternative. The class must be no lower than semi-synthetic, preferably “synthetic”. The mineral base is not recommended for use, since the technical characteristics of the fluid do not match the standards of the Toyota Corolla engine.
Obviously, the wrong oil cannot fully lubricate and cool the rubbing parts of the power unit. Among the proven brands are the following: Mobil, Shell, Castrol. Replacing your own engine oil Toyota Corolla, you extend the life of the engine, reduce the coefficient of friction, fuel consumption.
Toyota Corolla Engine Oil Change – Instruction
The process of self-replacement of oil in the engine of the Toyota Corolla takes no more than 20 minutes, subject to a professional approach, the availability of consumables, components. Together with the replacement of oil in Toyota Corolla, we will update the filter element with our own hands, check the level of transmission fluid in the gearbox.
- Toyota Corolla E150 (1.6) is installed on the viewing channel, the power unit is heated to a working temperature of 40 ° C;
- The key to the “14” unscrew the drain plug of the crankcase sump. We merge working off in an empty container;
- We wait 7 – 10 minutes, until the oil is fully absorbed, screw the cork in;
- To the left of the hole is a container for the cleaning element. Unscrew it with a special cap wrench, replace it with a new one;
- In the engine compartment, through the filler neck, we fill in a new semi-synthetics (synthetics) in the amount of 4.0 – 4.250 liters.
We start the power unit for 2 – 3 minutes, we turn off, we make control measurement of oil on the dipstick, the level should not exceed the mark of MIN and MAX.
Subject to the recommendations, the purchase of original consumables subsequent replacement after 10 – 15 thousand km. The algorithm is not complicated, it is quite possible to change the engine fluid in a garage. In the box, the machine also needs replacement. The volume of oil in the automatic transmission Toyota Corolla is 3.80 liters.